The product behind the transformation.
Specify, approve, and deliver 3M™ DI-NOC™ Architectural Finishes for hotels, healthcare, corporate interiors, aviation, marine, and commercial projects across Canada.
Technical data, series codes, fire-rating documentation, and substrate review — the specification support to write 3M™ DI-NOC™ into a commercial project with confidence.
A specification-ready architectural finish system.
3M™ DI-NOC™ Architectural Finishes are a professional-grade, pressure-sensitive surface film system engineered with 3M™ Comply™ micro-air-release channel adhesive technology — designed for commercial interior applications where finish quality, fire compliance, long-term durability, and manufacturer documentation matter. They replicate the appearance of woodgrain, stone, marble, metal, leather, textile, and concrete at a standard that holds up in specification drawings, AHJ review, and close-out packages.
It is used to renew suitable existing commercial interior surfaces — walls, columns, doors, casework, millwork, and elevator interiors — applied over a prepared substrate rather than torn out and replaced. Under ASTM E84 (interior use), most 3M™ DI-NOC™ products are Class A, and CAN/ULC-S102.2 data is available for applicable products for Canadian code review — the applicable series and assembly are confirmed with 3M for the specific project. 3M publishes an expected performance life of up to 12 years for indoor vertical applications, subject to surface preparation, installation, environment, use, and maintenance. It is applied across our corporate interiors, elevator modernization, and hospitality work.
The Design Ranch works as a commercial architectural surface-solutions partner — guiding finish direction, substrate review, specification, and coordinated delivery, with product-series documentation supporting AHJ review and close-out. Full technical data is available through our specification support for designers and specifiers. The studio holds 3M™ Preferred DI-NOC™ Endorsed Installer accreditation.
Specification-grade, series by series.
Because it is a specified, repeatable product rather than a one-off finish, a 3M™ DI-NOC™ specification carries the same appearance and documented performance across a whole building — and across a portfolio of sites. The library spans woodgrain, stone, marble, metal, leather, textile, and concrete looks, so a corporate or hospitality standard can be held consistently from lobby to last door.
Fire performance, VOC emission data, and warranty terms are documented per product series and confirmed for the specific project — the substance that lets a finish clear AHJ review and close-out.
The commercial project journey.
A successful commercial surface project is shaped well before application. The Design Ranch works as a surface-solutions partner across the full journey — assessment, specification, phasing, and disciplined delivery — so the finish performs and the building keeps operating.
Surface & Substrate Assessment
Every surface is assessed before material is ordered — porosity, condition, existing finishes, and substrate type all affect adhesion and long-term performance. Substrate review guides the right finish series and adhesion approach for the environment.
Finish Selection & Specification Support
We guide finish direction and selection across the 900+ finish library, then support the specification — product-series data sheets, fire and VOC documentation, samples, and mock-ups — so the finish is right on the drawing and defensible at review.
Preparation & Project Phasing
Substrates are prepared to 3M™’s requirements, and work is planned and phased around an operating building — after hours or zone by zone — to keep disruption low while the surface is renewed.
Precise Application, Review & Close-Out
Film is applied, seamed, and heat-formed to flat, curved, and complex profiles with experienced technique, then reviewed and closed out — with fire-rating records, warranty terms, and substrate notes on commercial engagements where applicable.
Over 900 finishes, by category.
The 3M™ DI-NOC™ Architectural Finishes library covers every surface category required for commercial specification. For the full digital catalogue, physical sample coordination, and series-specific technical data sheets, contact The Design Ranch directly.
Woodgrain + Fine Wood
The most specified 3M™ DI-NOC™ category. Natural oak, walnut, teak, maple, ebony, and specialty wood expressions from raw grain to lacquered finishes — with dimensional depth and controlled reflection that reads as genuine timber at close range.
Stone + Marble
Marble, travertine, limestone, slate, and concrete expressions for feature walls, reception surfaces, elevator cabs, and column wraps. High-fidelity pattern repeat with consistent veining across large installations — without the weight, cost, or forming complexity of real stone.
Metal + Industrial
Brushed steel, anodised aluminium, copper, bronze, oxidised metal, and advanced metallic finishes for elevator cabs, reception desks, feature walls, and casework. Metal aesthetics without structural complexity, panel weight, or fabrication cost.
Concrete + Abstract
Raw concrete, polished cement, and abstract surface expressions for contemporary commercial interiors. Consistent tonality across large panel runs — without the substrate weight, forming cost, or curing time of architectural concrete.
Leather + Textile
Embossed leather, woven textile, and soft-surface expressions for hospitality, corporate, and private aviation environments. Adds warmth and tactile interest to millwork panels, feature walls, reception surfaces, and aircraft cabin interiors.
Specialty + Exterior
The AR Series provides enhanced surface hardness for floors, counters, and high-contact wall applications. The EXR Series is UV-stable and weather-resistant for exterior facade applications. The E-Series RC incorporates post-consumer recycled polyester; its material data may support applicable LEED documentation and credit pathways.
The data your project requires.
Technical documentation is available for every product series. Full data sheets, substrate compatibility guides, adhesion test results, and installation manuals are available on request, and complete documentation packages are provided as standard on commercial close-out. CSI MasterFormat specification section: 09-94-10.
What to compare before specifying an architectural finish.
Before selecting any architectural surface finish, these are the criteria that determine fit for a commercial project. Compared with conventional demolition and replacement, resurfacing a suitable existing surface can reduce disruption and downtime where project conditions permit — outcomes depend on scope, substrate, and program.
Or see the dedicated side-by-side: 3M™ DI-NOC™ vs. other architectural resurfacing options — twelve criteria across film, millwork, stone, paint, and laminate.
Substrate & Surface Condition
Whether the existing surface is sound, clean, and suitable for a bonded finish — the single biggest factor in performance.
Finish & Pattern Availability
The range of woodgrain, stone, metal, and other looks available, and how closely they match the design intent.
Fire-Test Documentation
Fire-test data for the selected series and assembly (e.g., ASTM E84 / CAN-ULC), confirmed for the specific project and AHJ.
Warranty Scope & Exclusions
What the manufacturer warranty covers, its duration and exclusions, and how it applies in your region.
Interior / Exterior / Curved Limits
Where the finish is rated to perform — interior versus exterior, and how it behaves on curved and 3D surfaces.
Cleaning & Maintenance
Compatibility with the cleaners and disinfectants the space uses, and the ongoing maintenance the finish requires.
Repeatability Across Sites
Whether the finish can be replicated consistently across phases or a portfolio of properties.
Samples, Support & Close-Out
Access to physical samples, technical support, and close-out documentation for submittals and review.
Phasing & Operational Disruption
How the work can be scheduled around an operating building, and the downtime each option requires.
A finish that reads on the drawing and on the wall.
For architects, designers, and owners, 3M™ DI-NOC™ combines broad design choice with the documentation a commercial specification and close-out require — delivered by a partner who supports the whole project.
Broad Design Choice, Held Consistently
Over 900 finishes across woodgrain, stone, marble, metal, leather, textile, and concrete — a specified, repeatable product that holds one design standard from lobby to last door, and across a portfolio of sites.
Documented by Product Series
Fire testing, VOC emissions, and durability data are documented per product series and confirmed for the specific project — the specification-ready substance that clears AHJ review and close-out.
Renewed In Place, With Expert Support
Applied over suitable existing surfaces, DI-NOC reduces demolition and operational disruption where project conditions permit. The Design Ranch provides finish direction, substrate review, specification, and coordinated delivery — backed by 3M™ Preferred DI-NOC™ Endorsed Installer accreditation.
What specifiers ask most.
What surfaces can 3M™ DI-NOC™ be applied to?
3M™ DI-NOC™ adheres to most hard, smooth, or lightly textured substrates including MDF, plywood, melamine, laminate, painted drywall, glass, metal panels, fibreglass, and many plastics. Substrate condition — particularly cleanliness, porosity, and surface integrity — determines adhesion performance. The Design Ranch conducts substrate review on every project before specifying film series and adhesion method.
Is 3M™ DI-NOC™ fire rated?
Many 3M™ DI-NOC™ series carry ASTM E84 Class A flame spread (FSI ≤25) and smoke development (SDI ≤450) ratings, and Canadian projects can reference CAN/ULC-S102.2 data on listed products. Fire-rating documentation by product series is available for commercial projects. The Design Ranch confirms the applicable series and provides the documentation your authority having jurisdiction (AHJ) requires — fire performance is confirmed per specific product series and project.
How long does 3M™ DI-NOC™ last?
3M publishes an expected performance life of up to 12 years for indoor, vertical applications, subject to surface preparation, installation, environment, use, and maintenance. This is a performance-life expectation, not a warranty term. Actual longevity varies by substrate, finish series, and setting; fire, warranty, and finish data are confirmed by product series for the specific project.
Can 3M™ DI-NOC™ be applied to curved surfaces?
Yes — 3M™ DI-NOC™ can be heat-formed to columns, curved surfaces, and complex three-dimensional profiles. Forming capability varies materially by product series, substrate, and geometry, so tight radii and compound curves are confirmed for the specific detail during specification and substrate review.
What support does The Design Ranch provide before installation begins?
Most of a successful surface project is decided before application. The Design Ranch provides finish direction and selection, substrate and surface-condition review, specification support, product-series documentation, samples and mock-ups, and project phasing — then coordinates precise delivery, review, and close-out. 3M™ Preferred DI-NOC™ Endorsed Installer accreditation supports the technical execution.
Does 3M™ DI-NOC™ support LEED certification?
Yes. The E-Series RC (Recycled Content) series incorporates post-consumer recycled polyester in the base film layer and can contribute to LEED Material and Resources credits. VOC emission data is available for applicable series (CDPH Standard Method V1.1 and V1.2 compliant). 3M™ DI-NOC™ can also support Interior Reuse and C&D Waste Management credits by renewing existing substrates rather than replacing them. The Design Ranch provides LEED-supporting material documentation as part of the standard commercial close-out package.
How is 3M™ DI-NOC™ different from generic architectural film or vinyl wrap?
3M™ DI-NOC™ is an architectural surface film engineered and tested to commercial specification standards — not a vehicle wrap or signage vinyl. The distinction is in film construction, adhesive system (3M™ Comply™), ASTM E84 Class A fire classification on many series, dimensional stability under commercial conditions, CSI specification section (09-94-10), and the breadth of the pattern library. It is designed to be specified on architectural drawings, closed out with documentation, and perform for the lifetime of a commercial interior.
Does The Design Ranch work outside Calgary?
Yes. The Design Ranch works across Canada, the United States, and internationally on qualified commercial projects, wherever the scope and specification warrant engagement. Contact us to discuss your project location, timeline, and phasing requirements.
Ready to specify 3M™ DI-NOC™ Architectural Finishes?
Bring The Design Ranch in early for finish direction, substrate review, technical documentation, and installation planning — before the specification is finalized. Full data is available through our specification support for designers and specifiers.